INDESTEP Model  IDVR050/8ST

INJECTION MOULDING MACHINE

PRELIMINARY SPECIFICATION

 

Data relating to the standard mould form

Mould base area                                                                                  310 x 310                                mm

Standard closed mould height                                                              330                                         mm

Standard mould opening stroke                                                           250                                         mm

Maximum ejection stroke                                                                    100                                         mm

 

Machine data relating to the mould

Maximum mould closing force                                                           7.27                                         kN

Maximum mould locking force                                                           500                                         kN

Maximum mould opening force                                                            53.5                                      kN

Maximum ejection force                                                                       21.5                                     kN

 

Machine data relating to the injection unit

Screw diameter                                                     28                            30                            35            mm

Swept volume                                                       92                          106                           144            cc

Shot weight (PS)                                                   83                            95                          129            g

Maximum injection fill pressure                         2500                        2177                        1600            bar

Maximum injection fill rate                                   92                          106                         144             cc/sec

Plasticising capacity (PS)                                      16                            18                           21            g/sec

Screw L:D ratio                                                     21.4                         20                          20            L/D

Screw stroke                                                                                       150                                          mm

Screw torque                                                                                       400                                          Nm

Screw speed                                                                                    10 350                                       rpm

Hold plunger diameter                                                                          17.5                                       mm

Hold plunger stroke                                                                              45                                          mm

Maximum hold volume                                                                         10.8                                        cc

Maximum hold pressure                                                                   2268                                           bar

Nozzle sealing force                                                                             52.4                                         kN

Nozzle retract stroke                                                                          350                                          mm

Heating capacity                                                  13                            13                           14            kW

Number of heating zones                                                                    8 + Ns                                     qty

 

Machine data general

Pump drive motor                                                                                 15                                            kW

Hydraulic system pressure, general/lock                                         175/200                                          bar

Oil filling                                                                                             200                                          l

Dry cycle rate, EUROMAP + index time                                             2400                                          1/h

Machine dimensions L x W x H                                                         2.63 x 1.68 x 2.46                       m

Dry weight                                                                                        2700                                         kg

Number of mould stations                                                                       8                                         qty

Mould temperature control circuits                                                        16                                         qty

 

Mould station functions

 

                                                1 Mould preparation insert loading.

                                                2 Mould closing

                                                3 Mould locking and injection fill/hold.

                                                4 Mould locking and injection fill/hold.

                                                5 Cooling (and mould change).

                                                6 Cooling.

                                                7 Mould opening.

                                                8 Ejection and product removal.

 

                                                        TOPICS INDEX PAGE             NEXT PAGE